Blaupunkt 7 645 650 310 Car Stereo System User Manual


 
88
Gently insert the DVD with its
printed side pointing up into the
drive until you feel some resist-
ance.
The drive draws in the DVD automati-
cally.
You must not hinder or assist the drive
as it draws in the DVD.
Gently close the control panel
whilst exerting a little pressure un-
til you feel it click into place.
The DVD data are loaded.
Dependent upon the inserted DVD, the
playback starts or the DVD menu dis-
plays.
If a DVD is already inserted in the
drive,
press the SRC button ; on the
device or the SOURCE button ;
on the remote control repeatedly
until “DVD” appears on the display.
Playback begins from the point at which
it was last interrupted.
Starting playback
After the desired DVD/VCD is loaded,
either the DVD menu is displayed or
the playback starts. This action is de-
pendent upon the inserted DVD.
Press the button A or move
the selection mark to the menu
item that starts the movie, and
press the ENTER button > to
start the playback.
The DVD starts playing.
This device can be used to play the
following data carriers/data formats:
DVD video and DVD audio. DVD-
MP3/WMA
Video CD (VCD).
MP3/WMA CDs, see the chapter
“MP3/WMA mode”.
Audio CDs, see the chapter “CD
mode”.
License
Manufactured under license of Dolby
Laboratories. “Dolby”, “Pro Logic” and
the double-D symbol are trademarks
of Dolby Laboratories.
This product contains technologies that
are copyright-protected under certain
US-American patents. The copyrights
are property of Macrovision Corpora-
tion and other copyright owners. The
use of this copyright-protected technol-
ogy must be approved by Macrovision
Corporation and is intended exclusively
for private use and other presentations
in a limited scope, unless Macrovision
Corporation first issued a respective
permission.
Switching to DVD mode
If there is no DVD inserted in the
drive,
switch on the device by pressing
button 1.
Press the button 2.
The control panel opens.
DVD OPERATION
02LasVegasDVD35_gb 08.07.2005, 14:16 Uhr88