Filter
Top Products
106
Repeated playback of a defined
section of a title
You can use the remote control to de-
fine a section of a title and repeat it
endlessly in a loop.
Note:
This function is operable only if an
external display is connected.
To define the starting point of the sec-
tion,
➮ listen to a title and press the A-B
button L on the remote control at
the point where you want the re-
peat function to start.
To define the ending point of the sec-
tion,
➮ listen to a title and press the A-B
button L on the remote control at
the point where you want the
repeat function to end.
The section of the title is repeated until
you press the A-B button L again.
Interrupting playback (PAUSE)
➮ Press the button 6 9.
“PAUSE” appears on the display.
Cancelling pause
➮ During the pause, press the but-
ton 6 9.
Playback is continued.
You can also interrupt and continue
playback using the button A on the
remote control.
Changing the display
You can select different displays for CD
mode:
● “NORMAL MODE”:
First line: Track number
Second line: Playing time
● “INFO MODE”:
First line: Track number and play-
ing time.
Second line: CD text (if available)
● “CLOCK MODE”:
First line: Track number and play-
ing time.
Second line: CD text (if available)
and time
● “MINIMAL MODE”:
The title number is displayed on
the top line.
Note:
CD text can only be displayed if
the appropriate information is con-
tained on the CD.
To switch between the display options,
➮ press the DIS•ESC button 5
once or several times until the de-
sired display is shown.
Display on an external display
In CD mode, the following information
is always shown on an external display,
independent of the selected display of
the device display:
● the number of the current track,
● the number of tracks on the CD,
● the track information from the CD
text (if available)
and
CD MODE
02LasVegasDVD35_gb 08.07.2005, 14:16 Uhr106