Filter
Top Products
124
➮ Press the or button 6 repeat-
edly until the equalizer band that you
want to configure (“LOW1”, “LOW2”,
“HIGH1”, “HIGH2” or “HIGH3”)
appears on the display.
➮ Press the MENU•OK button 7.
➮ Press the or button 6 repeat-
edly until the frequency that you
want is displayed.
➮ Press the MENU•OK button 7.
The top line displays the GAIN and the
quality factor “Q”. The gain setting
flashes. You can use the quality factor
to adjust the width of the filter. The high-
er you set the value for the quality fac-
tor the more directly the filter will be
applied to the selected frequency.
To adjust the gain,
➮ press the or button 6.
To adjust the quality factor,
➮ press the button 6.
The quality factor setting flashes.
➮ Press the or button 6
repeatedly until the setting that
you want is displayed.
Note:
Please note that you can boost or
reduce one frequency in each
equalizer band. Proceed in the
way described above with all the
equalizer bands that you want to
adjust.
➮ Press the MENU•OK button 7
and then repeatedly the DIS•ESC
button 5 or the AUD•DEQ button
; for longer than two seconds.
The settings are saved.
Manually adjusting the
equalizer
Notes on adjusting the settings
We recommend you use a CD that you
are familiar with for making changes
to the settings.
Before adjusting the equalizer, set the
sound and volume distribution settings
to zero and deactivate X-BASS. For
further information, please read the
“Sound” chapter.
➮ Listen to the CD.
➮ What kind of impression does the
sound make?
➮ Now read the “Sound impression”
column in the table entitled “Help
adjusting the equalizer”.
➮ Set the equalizer values as de-
scribed in the “Measures” column.
Making adjustments
➮ Hold the AUD•DEQ button : or
the 3D button : on the remote
control pressed for more than two
seconds.
➮ Press the or button 6
repeatedly until “MANUAL EQ”
appears on the display.
➮ Press the MENU•OK button 7 or
ENTER > on the remote control.
➮ Press the or button 6 re-
peatedly until the equalizer that
you want to configure (“USER
EQ1”, “USER EQ2” or “USER
EQ3”) appears on the display.
➮ Press the MENU•OK button 7.
EQUALIZER
02LasVegasDVD35_gb 08.07.2005, 14:16 Uhr124