Filter
Top Products
18
Disc Name List
Allows you to scroll through names of discs in changer without leaving currently-playing disc.
1. Press SRC for more than 1/2 second to enter LIST mode. Small “L” appears in left-most
position of display.
2. Use /\ and V to scroll though names. (Disc number appears if disc has not been named and
identified since magazine was inserted. See Disc Name Table, below.)
3. If you find name of a disc that you want to hear, press < or > and changer automatically goes
to that disc. If no new disc is selected, the LIST mode automatically ends after 5 seconds.
Disc Name Table
Until the changer has the chance to identify the discs in a newly-inserted magazine, the names of
any named discs are not available. When a new magazine is inserted, the changer reads and
identifies the discs’ names at the earliest of the following opportunities: Disc Select (automatic or
manual), Disc Scan, or Disc Select during Disc Naming mode. Or, if you switch to another source
before the discs have been read, the changer automatically reads and identifies the names of the
unread discs in a background scan that lasts at most about 2 minutes, making the names readily
available as soon as possible!
Track Repeat
To play current track repeatedly, press RPT as needed until RPTI appears. If track manually
advanced, RPTI remains active for new track.
Disc Repeat
To play current disc repeatedly, press RPT as needed until RPTII appears. Once all tracks on disc
are played, disc is repeated. If disc manually advanced, RPTII remains active for new disc.
To cancel RPT feature, press as needed until RPT indicator disappears.
Track Mix
Press MIX as needed until MIXI icon appears. This also cancels repeat, scan, and TPM features, if
previously active. A track will not be played a second time until all tracks have been played. Once
all tracks have been played, next disc is selected.
Disc Mix
Press MIX as needed until MIXII appears. MIXII behaves per software in CD changer. Press of /\ /
V during MIXII mode returns unit to regular play. To cancel MIXII, press as needed until MIX
indicator disappears.
Permissible combinations of MIX and RPT
Press of MIX during RPTII mixes all of tracks within one disc continuously.
Pause
To pause, press ll . To resume playback, press again or press other playback button.
Track Scan
Press SCA to start Track Scan. “TRCKSCAN” appears, then Track No. and Elapsed Play Time
blink during scanning operation. Unit stops at each track for scan time set under Menu. After
∆