Filter
Top Products
20
deleted. When name reappears “+” programming symbol will no longer appear.
Direct Software Control Menu
Blaupunkt’s exclusive Direct Software Control Menu has many unique features that allow you to
customize the unit to your needs and preferences. All Menu options (except timer and naming
options) are available regardless of which source is in use: AM, FM, Cassette, Changer, Auxiliary.
Using the Menu (See Traffic Safety & Precautions on page 4)
1. Press DIS/MENU for 2 seconds to enter Menu mode.
2. Press /\ / V controls to scroll through Menu.
3. Use << or >> to change Menu setting (or to enter the following modes: Turn-on Message,
Clock Adjustment, Timer Set, Station Name Access/Edit and Disc Name Access/Edit.)
4. Exiting Menu: Press of DIS (or after 8 seconds), unit exits from Menu. Changes are stored
upon manual or automatic time-out of Menu or turn-off by PWR button — but not stored if exit
caused by panel release or ignition off.
Turn-On Message Activation (“MSG ON”/”MSG OFF”)
Press << or >> to turn message on or off.
Turn-On Message Programming (“MSG ENTR”)
The unit can scroll a 40-character message across the display at the time of turn-on. To create your
own message:
1. Press >> button. Eight characters appear with the first one blinking.
2. Press /\ / V to select desired characters. If you want to put a blank space in name, select “__”.
3. Press << or >> to locate next character.
4. After eighth character (the farthest right character) is completed, first (left-most) character of
next group of eight characters begins to flash. After fifth group of eight characters, pressing >>
will access first group again.
5. Press Mute to store turn-on message and return to Menu.
Clock Adjustment (“CLOCKSET”)
Pressing << or >> shows blinking time. Subsequent press of << advances the hour; >> advances
the minutes. (To change minute indicator to nearest hour (:00), press Mute button). Unit begins
keeping the time when /\ or V is pressed or when Menu mode ends.)
Tuner Timer Set Mode (“TMR SET”)
1. Before entering Menu, tune in the radio frequency to be activated by timer.
2. Enter Menu mode and scroll to “TMR SET” by pressing /\ or V.
3. Press << or >> to enter timer adjustment mode.
4. Select time that unit should switch to this station by pressing << to adjust hours, >> to adjust
minutes. Press Mute to adjust minutes to :00.
5. To store station and time, press /\ / V or DIS.
Tuner Timer On/Off (“TMR ON”/“TMR OFF”)
Tuner timer allows unit to go to a certain frequency at a certain time — from any source. When