Filter
Top Products
Changing basic settings in the settings menu
115
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
Changing the user-defi ned col-
our ( USER)
Two options are available to
change the user-defi ned colour.
Option 1:
Press the softkey
: (next to
"USER").
Set the desired colour using
the softkeys
7 to <.
"RED–": Reduces the red por-
tion.
"GREEN–": Reduces the
green portion.
"BLUE–": Reduces the blue
portion.
"RED+": Increases the red
portion.
"GREEN+": Increases the
green portion.
"BLUE+": Increases the blue
portion.
The colour of the display
changes accordingly.
Option 2:
Press the softkey
; (next to
"COL-SCAN").
The display sequentially shows
all colours that can be dis-
played.
Press the softkey
7 (next to
"SAVE") or the OK button
A to
select the colour currently dis-
played.
➔
➔
•
•
•
•
•
•
➔
➔
Press the softkey
< (next to
"BREAK") or the ESC button
@
instead to exit the "COL-SCAN"
menu item without changing
the colour.
Adjusting the display viewing
angle ( ANGLE)
The angle at which the driver looks
at the display is dependent upon,
among other things, the installa-
tion position of the device, the
seating position, and the physical
size of the driver. You can adjust
the display contrast to your view-
ing angle as follows.
Press the softkey
8 (next to
"ANGLE").
The "ANGLE" menu item is
fl ashing. The current display
contrast is shown on the main
line
A.
On the rocker switch 3, press
or to increase the display
contrast.
On the rocker switch
3, press
or to decrease the display
contrast.
You can adjust the display
contrast in 13 increments from
–6 to +6.
Changing the brightness of the
display for day/night (BRIGHT)
See page 85.
➔
➔
➔
➔
03_BA_Casablanca_1_ENG.indd Menü11503_BA_Casablanca_1_ENG.indd Menü115 31.05.2006 11:15:55 Uhr31.05.2006 11:15:55 Uhr