Filter
Top Products
Changing basic settings in the settings menu
114
Inverting the display ( INVERT)
Press the softkey
: (next to
"INVERT").
Bright portions of the display
are displayed as dark, dark por-
tions as bright.
Switching the spectrum analyser
on/off ( SPECTRUM)
Instead of displaying the audio
source, the device can display a 5-
band spectrum analyser. For this
purpose, the screen saver must be
deactivated (see next section) and
you must activate the display of
the spectrum analyser as follows.
Press the softkey ; (next to
"SPECTRUM").
"SPECTRUM ON": The spec-
trum analyser can be dis-
played.
"SPECTRUM OFF": The spec-
trum analyser cannot be dis-
played.
The spectrum analyser automat-
ically appears 16 seconds after
the last button is pushed instead
of the display of the audio source.
You can also display the spectrum
analyser manually:
To do so, press the ESC button
@ while the display of the au-
dio source is shown.
Press any button to switch the
spectrum analyser off.
➔
➔
•
•
➔
➔
Activating/deactivating the
screen saver ( SCREEN S)
Instead of displaying the audio
source, the device can display a
screen saver. For this purpose,
the display of the spectrum an-
alyser must be deactivated (see
previous section) and you must
activate the display of the screen
saver as follows.
Press the NEXT button
6 to
change to the second page of
the "DISPLAY" menu.
Press the softkey
7 (next to
"SCREEN S").
"SCREEN SAVER ON": The
screen saver starts immedi-
ately.
"SCREEN SAVER OFF": The
screen saver is not shown.
The screen saver automatically
appears 16 seconds after the last
button is pushed instead of the
display of the audio source. You
cannot display the screen saver
manually:
Press any button to interrupt
the screen saver and show
the display of the active audio
source again.
➔
➔
•
•
➔
02_BA_Queens_1_GB.indd Menü11402_BA_Queens_1_GB.indd Menü114 04.09.2006 11:00:59 Uhr04.09.2006 11:00:59 Uhr