Filter
Top Products
Error table
123
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
Displaying the serial number
( SER NUM)
Every device has a separate serial
number. To display this number:
Press the softkey
: (next to
"SER NUM").
The serial number is shown on
the main line
A.
➔
Error table
If the device does not function properly, switch the device off and on
again.
If problems still persist, you can easily correct the following problems.
Problem Possible cause Possible remedy
The menus do not appear
as shown in these instruc-
tions.
The tuner cannot be adjust-
ed to the frequencies listed
in the technical data.
The device is not set to
your region.
Set the device to your re-
gion as described on page
88.
The display shows informa-
tion about the device.
The demo mode is acti-
vated.
Briefl y press the MENU but-
ton
?. Press and hold this
button again for four sec-
onds.
The device is always silent,
even though it is correctly
connected.
The internal amplifi er is
switched off.
Switch on the internal am-
plifi er as described on page
122.
If problems still persist, please contact an authorised workshop or the
Blaupunkt customer service (see the last page).
02_BA_Queens_1_GB.indd Fehler12302_BA_Queens_1_GB.indd Fehler123 04.09.2006 11:01:00 Uhr04.09.2006 11:01:00 Uhr