Blaupunkt RDM 169 Car Stereo System User Manual


 
63
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Switching the internal output
stage on/off
Use AMP (amplifier) to switch the internal
output stage on or off. If an additional am-
plifier has been connected and only the
preamp outputs are being used, it is a good
idea to switch the internal amplifier off.
Switching on/off:
Press AMP, “Amp on” or “Amp off” will
appear in the top line of the display.
Use << / >> to switch this setting to on
or off.
Press ENT to store the new setting
and return to the INSTALL menu.
Connecting external equipment
If external equipment is connected, you have
to switch AUX to on. The default setting for
AUX is off.
AUX will not appear as a menu item if a Blau-
punkt CD changer has been connected.
Closing the Install menu
Press EXIT.
Reset to default settings
“NORM (set)” will reset any settings you
have altered!
Exception: The stations stored on the sta-
tion presets will remain stored.
If you would like to reset to the default set-
tings,
press NORM and then press ENT for
approx. 2 sec.
Switching the ignition connec-
tion on/off
Use IGN (ignition) to be able to switch the
car radio on and off with the ON button only
or with the ignition as well.
Switching on/off:
Press IGN, “Ign on” or “Ign off” will ap-
pear in the top line of the display.
Use << / >> to switch on to off or off to
on.
Press ENT to store this setting and re-
turn to the INSTALL menu.
Enter the data you want to use to identify
the unit.
Example:
Line Information
1 MONIKA
2 MÜLLER
3 LANDS 18
4 HILDES-
5 HEIM
6 HI-XX000
Once you have completed your entry for the
first line,
press NEXT, the display will switch au-
tomatically to the next line.
The DOT display indicates the number of
the line selected (1 - 6).
If you would like to alter the entry in a spe-
cific line,
press NEXT as often as required.
To complete your entry,
press ENT.
If the unit is switched on without the Key-
Card, this owner ID information will appear
in the top line of the display for approximately
8 sec.
First-time installation
S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr63