Blaupunkt RDM 169 Car Stereo System User Manual


 
74
“CD 2 T 2” CD number and track
number (for changer opera-
tion only)
The DOT display will indicate the elapsed
playback time.
or
“VIVALDI” CD name
or
“14:34” Time
The DOT display indicates the CD track
number.
The CD name will not be displayed unless
a name has already been entered.
Please refer to the section on “Entering CD
names”.
CD changer operation
Selecting CDs
In menu level 1, two pages indicate which
magazine slots have CDs in them. Use
NEXT to page through this list.
If you have named the CDs, the first four
letters in the name will appear in the display
instead of the CD number.
Press the corresponding key to select
a CD.
You can also use <</>> on the rocker
switch to select CDs.
CD and CD changer operation
Selecting tracks
You can use the rocker switch to conven-
iently select tracks or passages.
/ Track selection
Up: Press briefly.
CUE - fast advance (audible): Hold
pressed down.
Down: Press twice or as many times
as required.
CD changer operation
Switching on CD changer
operation
Make sure that at least one CD has been
inserted into the magazine.
Press CDC, the CDC functions will ap-
pear in the display, e.g. CD and track
number, name/playback time.
CD and CD changer operation
Selecting the display mode
You can select the desired display mode for
CD and CD changer operation:
Press DIS as often as necessary until
you have selected the desired display
mode.
Top line
DOT display
“TRACK 1” CD track number (CD oper-
ation)
or
CD operation / CD changer operation
S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr74