Filter
Top Products
75
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
TPM
(Track-Program-Memory)
Use this feature to program and play your
favourite CD tracks in CD and changer op-
eration.
Up to 30 CDs can be managed in the CD
mode, up to 99 discs in the CDC mode, with
a maximum of 40 tracks each. If you enter a
name for a CD, this CD will also be stored
in the TPM. TPM can only be used in the
mode it was stored in (CD or changer oper-
ation).
Switching TPM playback on/off
• Press TPM briefly. The mode selected
will appear briefly in the display (TPM
on/off).
The red arrow will light up when TPM is ac-
tive. All of the CD tracks stored with TPM
will be played back.
TPM playback cannot be activated unless
you have already stored tracks with the TPM
function.
Storing tracks with TPM
A track can only be stored while it is play-
ing, TPM must be switched off.
For CD changer operation, press CDC to
switch the menu levels.
To store a track
• press TPM for approx. 1 second, “TPM
Prog” will appear in the display.
This track has been stored.
Deleting the TPM
You can delete the tracks stored with TPM.
TPM tracks can be deleted with CLR only
when they are playing.
• Switch on TPM.
If you would like to delete the track playing
• press CLR for approx. 2 sec., “TR clr”
will flash briefly in the display.
If you would like to delete all of the tracks
on the CD playing
• press CLR for approx. 5 sec., “CD clr”
will flash briefly in the display.
Use the DSC menu to delete all of the tracks
on all of the CDs in the magazine in chang-
er operation.
If necessary, refer to the section on “DSC
programming - CDC”.
To re-start a title: Press briefly.
REVIEW - fast reverse (audible):
Hold pressed down.
The rocker switch acts as a sequence switch
so that you can skip over several CDs or
tracks if you press it repeatedly.
Repeating tracks/CDs
You can repeat a track or a CD (in changer
operation) as often as desired. During CD
changer operation, use CDC to switch the
menu levels.
Use the RPT key to select the following func-
tions:
- RPT Trck = Repeat track
- RPT CD = Repeat CD (changer opera-
tion only)
- RPT off = Repeat function off
• Press RPT as many times as neces-
sary until you have selected the de-
sired setting.
The CD or the track will repeat until you
press RPT to switch off the function with
“RPT off”.
CD operation / CD changer operation
S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr75