Filter
Top Products
76
MIX
You can have the CD tracks played in ran-
dom order.
For CD changer operation, use CDC to
switch the menu levels.
The MIX function is active when the red ar-
row lights up in the display.
You can choose the following MIX functions:
Mix CD
The tracks on the selected CD will be played
in random order. For CD changer operation,
the next CD will be selected in numerical
order. MIX (random order) applies to the
playback of the tracks.
Mix MAG (for changer operation only)
CDC A 08: All tracks on the CDs in the mag-
azine will be played in random order.
CDC A 06/071/072: The CDs in the maga-
zine are selected at random and then the
tracks on the CD selected are played in ran-
dom order.
Mix off
The Mix function is deactivated. CDs will be
played in numerical order.
To alter MIX setting:
• Press MIX briefly, the function selected
will appear briefly in the display.
SCAN
Use this function to scan all of the CD tracks.
For CD changer operation, use CDC to
switch the menu levels.
To start the Scan function:
• Press SCAN briefly.
The red arrow will flash to indicate that the
function is active.
The titles will be scanned one after the oth-
er in ascending order.
To stop the Scan function:
• Press SCAN once again briefly.
The track currently scanned will continue to
play.
SCAN will also stop if you press the rocker
switch, MIX, RPT, DSC or AUD.
Entering CD names
You can enter names for up to 30 discs and
in changer operation for up to 99 discs.
The specified name (e.g. VIVALDI) will ap-
pear in the display if you have selected the
corresponding display mode with DIS.
For CD changer operation, use CDC to
switch the menu levels.
To start the entry:
• Press NAME, the first of seven entry
positions will begin to flash.
• Use the rocker switch
/ to select
the first character.
The capital letters A to Z, the numbers 0 to
9 and special characters are listed one af-
ter the other.
• Use the rocker switch << >> to move
to the next position and select a char-
acter.
Proceed as described above to select up to
8 characters in CD mode and up to 7 char-
acters in CD changer mode.
Once you have completed the name as de-
sired:
• Press ENT in order to store it.
If you would like to name another CD,
• insert a new disc
for CD operation
Or
• press << />> to select the CD for
changer operation.
You can change any existing name by en-
tering and storing a new one (overwriting).
Deleting CD names/TPM at the
same time
Use the DSC menu to delete the CD names
and the TPM at the same time.
The names for individual CDs and for CDs
in the CD changer are deleted separately.
Use “CD” to delete the name stored for the
CD in the CD drive and its TPM.
CD operation / CD changer operation
S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr76