Filter
Top Products
06
33
Installation
02
12
MP3/USB/SD
Wiring Connection
Video Out 1
Rear Audio Out
Front Audio Out
Reverse Video
Input
(Grey line with
yellow head)
(Light Grey line with
red & white head)
(Dark Grey line with
red & white head)
(Brown line with
yellow head)
The brown wire is connected with brake signal; for safety, the programs can be seen on the monitor
after braking the car, but the menu and RCA output are free of it.
If you do not want to use this function, connect it with the negative pole.
Do not connect the pink wire to the battery,otherwise it will use up the power of battery.
Note:
*
Video Out 2
(Grey line with
yellow head)
Subwoofer
(Brown line with
brown head)
2
Orange
Red
Yellow
Black
Ignition Key
Negative Ground
Rear L
Speaker
Front L
Speaker
Green/Black
Green
White/Black
White
Brown
Pink
Violet/Black
Blue
Violet
Grey/Black
Grey
Parking Brake (-)
Illuminating
control
To power
Antenna
Rear R
Speaker
Front R
Speaker
4
1
Screw Hole
2
5
Output Plug(Male)
Wire Clip
3
Antenna Receptacle
Output Socket(Female)
Choke
Box
3
4
5
6
Antenna
On Screen Display
Hold and press OSD button to display
the current time.
Note:
This function is operated by using the
remote control only.
*
1
6
Fan Window
During MP3/USB/SD mode, Press ( or
) on remote control to perform fast reward
or fast forward. Each press will change as
the following
Skip backward/forward/F.F
/F.REW the playback
20
2 X
Note:
4 X
8 X 16 X
* Press and in the monitor performs
the same function.
Exit an USB
During USB mode, the main unit would
switch to SD or DISC mode, if the previous
status is SD or DISC, otherwise the main
unit would switch to TUNER mode when
exit the USB.
During other modes, the main unit will keep
the previous mode when exit the USB.
Exit a SD Card
Push SD card to exit it.
During SD mode, the main unit would
switch to USB or DISC mode, if the previous
status is USB or DISC, otherwise the main
unit would switch to TUNER mode when
exit the SD card.
During other modes, the main unit will keep
the previous mode when exit the SD card..
Reverse Trigger (+)
Constant 12 Volts