Filter
Top Products
09
39
TunerBefore You Start
01
6
Replacing the Fuse
Make sure the amperage matches the
specified value when replacing the
fuses. If the fuse is blown, check the
power connection and replace with a
new one. If the same problem occurs,
it would be subjected to the malfunction.
In such cases, please consult to the
nearest service dealer.
When the range of the operation of the
card remote control becomes short or no
functions while operating. Replace the
lithium battery with a new button cell
(CR2025). Make sure the battery polarity
before replace.
Precautions on Using Lithium
Battery
Always keep the lithium battery beyond
children s reach. In case
swallowed, see a doctor immediately.
Cleaning the battery with a dry cloth,
to ensure its perfect connected.
Make sure the proper polarity when
loading with the battery.
To prevent short circuit, do not use
metal tweezer to clip the battery.
Gently pull out the Battery Holder while
pressing the Stopper.
Put the button-type battery with mark(+)
upward into the Battery Holder.
Replacing the Battery
Insert the Battery Holder into the Remote
Control.
!
Maintenance
Warning
Never use the fuse with the rated
amperage more than that supplied to
your unit, otherwise it will damage the
unit.
Warning!
Improper handle with the battery may
lead to explosion.
It cannot be charged , disassembled or
thrown into a fire.
!
Listening to the radio
DX/LOC Selector
During radio status, press LOC button
to select or weak station reception.strong
LOC ON appears on the display and
only local station is available. LOC OFF
appears on the display both distance and
local stations can be received.
5
The function is only valid on remote
control.
The function is invalid in AM tuning.
Note:
*
*
Band Indicator
Shows which band the radio is tuned
to.
1
Preset Number Indicator
Shows what preset has been selected.
2
Shows which frequency the tuner is
tuned.
Frequency Indicator
3
SEEK+/SEEK-
Briefly press to tune by the presettable
range, hold and press to tune automatically.
4
5
Selecting the Stored Station
During radio status, press button to
select the stored station upward, press to
select downward.the stored station
27
The function is only valid on remote
control.
Note:
*
6
BAND
To select the bands.
7
AMS
Briefly press to scan the current station,
hold and press to tune automatically.
8
MENU
Press this button to set the main menu.
9
SRC
Press this button to select the signal
source.
The 6 stations of the current band.
Briefly press to select station, hold and
press to save the current station to one
of the 6 stations.
Note:
* Press BAND on the head unit or in
the monitor performs the same function.
FM2
AM2 AM1
FM3
FM1
During radio status, repeatedly press
BAND button to select bands in
lowing order:
the
fol
Band Selector
3
Manual/Automatic Tuning
Manual Tuning: ress ( button
on the remote control continuously to select
a or respectively.
Por )
station downward upward
Automatic Tuning: ress and
) button seconds, the ra-
dio a station
or respectively and plays when
it finds a station.
P hold ( or
for more than 3
automatically searches down-
ward upward
Press / on the head unit or in the
monitor performs the same function.
Note:
*
6
FM1 CH:1 87.50MHz
87.50M
90.00M
98.00M
87.50M
108.00M
106.00M
1
2 3
4
6 78 9
5