Clarion MAX385VD Car Stereo System User Manual


 
Basic
Operations
~
;:,
Note:
~
Be
sure
to
read
this
chapter
referring to the
chapter
3
"3.
CONTROLS"
(page 5).
01
;:,
C
~
ACAUTION
When the
unit
is
turned on,
starting
and
stopping
the engine
with
its
volume
raised
to
the
maximum level may harm
your
hearings.
Be careful about
adjusting
the volume.
Turning on
and
off
the
power
Note:
Start
the
engine
before
using
this unit.
Be
careful
about
using this
unit
for
a
long
time
without running the engine.
If
you
drain the
car's
battery
too far,
you
may
not
be
able to
start
the
engine
and
this
can
reduce the service life
of
the
battery.
1. Start the engine. The power
button
/
knob
illumination on the unit will light up.
~
EngineON
~
position
2. Press the (POWER) button to turn on the
power.
* Pressing this button while the power
is
turned
on
will mute the volume
on
the MAX385VD,
on
the VRX485VD, the audio settings appear.
3. To turn off the power, press and hold the
[POWER] button for more than 1 second.
Selecting a mode
1.
Press the [MENU] button to display the
Source menu.
* External equipment not connected to this unit
is
not
displayed.
2.
Touch the desired mode key.
Adjusting
the volume
1.
Turn the volume knob to adjust the volume.
Clockwise: Increases the volume.
Counter- clockwise: Decreases the volume.
The volume level indicated in the display
is
in
a range from 0 (min.) to 40 (max.).
ACAUTION
While driving, keep the
volume
level at
which
external
sounds
can be heard.
Mute
1. If using a MAX385VD, press the PWR/MUTE
button to turn the mute on and off.
the mute on and off.
2.
If using a VRX485VD, press the [MUTE] button
to turn the mute on and off.
When the mute is turned on,
"-4x" appears
on the LCD screen.
Opening the operation
panel
and
adjusting
the angle
Open the operation panel when inserting/ejecting
a disc.
The angle of the operation panel can be adjusted
depending on the mounting angle of the unit or
light coming into the car.
ACAUTION
Do
not
move the operation panel
forcibly
or
do
not
apply
strong
force
to
the operation
panel.
When the operation panel
is
operating, be
careful
not
to
get
your
hand
or
finger
caught
between the operation panel and main
unit
or
its mechanical parts.
The
driver
should
not
operate the operation
panel while
driving.
17 VRX485VD/MAX385VD