Filter
Top Products
.Connecting
the parking brake cord
Connect the cord
to
parking brake lamp ground
in
the meter panel.
Note:
• Connecting the parking brake cord
to
lamp ground allows you
to
watch iPod video/DVD video/A Vinput
when the parking brake is engaged.
• When
the
parking brake cord is not connected, the monitor will not
show
any
video sources.
• If "AUDIO ONL
Y"
appears on the screen
just
after turning on the
ACC
power
of
the car, release the parking
brake while confirming safety,
and
then engage the parking brake again.
cord to battery
Parking brake cord
(Grass-green)
.How
to attach the electro-tap
1.
Place the Parking brake cord at the stopper, and
fold
it
back
in
the direction of the arrow.
2.
Pass the Parking brake signal cord through, and
fold
it
back
in
the direction of the arrow.
Parking brake
signal cord Parking brake
~
./
signal cord
~~c)
)Ir
Stopper
~
!
Parking brake cord
(G
rass-green)
Z
$:~
~~
z'
c'
~~
,-
o
z
Connecting the Accessories
.Connection
to the external amplifier
The external amplifiers can
be
connected to the 6 channel RCA output connections. Ensure that the
connectors are not grounded or shorted to prevent damage to the unit.
.Connection
to iPod devices
The iPod device can be connected
to
dedicated iPod connection
on
the main unit. For detailed
information, refer
to
the instruction sheet or manual for the iPod cable.
Note:
• This unit
may
not support all functions
of
all iPod devices
•
The
iPod connection will charge your iPod unless the iPod battery is completely depleted.
.If
the specified cord of the cellular phone
is
connected to the phone interrupt cord
of
the main
unit, the audio mute
is
available when the cellular phone is used.
• Sirius Satellite Radio Receiver
When a Sirius Satellite Radio Receiver
is
to
be
connected, use the dedicated connector. For detailed
information,refer
to
the instruction manual of the Sirius Satellite Radio Receiver.
VRX485VD/MAX385VD
46