Filter
Top Products
DVD Video Player Operations
Watching a DVD-Video
After disc loading, the play mode is automatically
engaged.
• When playback is not started, press the
[OK]
~
button or touch the
[~/II
] key.
~
• Button operation may differ depending on the
;}
story of the disc.
3
~
• After the menu screen is displayed
~
For normal DVD-Video discs, the DVD menu
screen appears.
After the DVD menu screen is displayed, select
an item
in
the following operations and play
it
back.
Showing the DVD PLA YER mode
screen
The DVD PLAYER mode screen is used to
control the playback mode from the screen.
1.
Touch the screen.
The DVD PLAYER mode screen
is
displayed.
If you do not touch the screen for 5 seconds,
the display will return to the playback screen.
Showing the DVD menu
1.
Showing the DVD PLAYER mode screen,
touch the [Menu] key during playback.
The DVD menu appears.
The
displayed contents may differ depending
*
on
the
DVD
software.
• Example showing DVD menu display
25 VRX485VO/MAX385VO
Operating the DVD menu
You can select the button items displayed
in
the
DVD menu by directly touching
it.
If the button items are hard to select correctly,
you can also operate them by using the remote
control directional buttons.
On the MAX385VD, you can press the volume
knob in momentarily, then turn it to change the
selected items on the screen. Press the
[~/II]
button to select
it.
On the VRX485VD, you can use the right knob
to change the selected items on the screen.
Press the right knob or
[~/II]
button to select
it.
Stopping playback
1.
Showing the DVD PLAYER mode screen,
touch the [ • ]
key.
Playback
is
stopped.
On the VRX485VD, you can also press the
[.]
key on the front control panel.
2.
To resume playback, press the
[~/II
] button.
Playback resumes from the scene where
playback
is
stopped.
Pausing playback
1.
Press the [ OK] button or touch the
[~/II
]
key during playback.
Playback pauses.
2.
To resume playback, press the [
~!II]
button
again.
Playback resumes.