Filter
Top Products
1.
Press the [EO] button on the screen or
the [SEL] button on the remote control.
2.
Touch the item key to adjust.
3.
Perform the adjustment.
See the following sections for detail.
4.
Touch the
[Back]
key to return to the previous
screen.
*
In
the
following sections, only the details
regarding adjustments are described,
procedures
to
select items are skipped.
Adjusting the AUDIO
Returning the operation panel to the
original angle (MAX385VD)
1.
Press the
[lk]
(OPEN/CLOSE) button
to open the motorized LCD panel. 0
2.
Keep pressing the
Wt.]
(OPEN/CLOSE) button
:E
until the panel is back at the normal position.
~
""l
lI\
Basic Operations
Opening/closing the operation panel
1.
Press the
[0/:.1
(OPEN/CLOSE) button.
The operation panel will be opened or closed.
Note:
• The operation panel will close automatically when
a disc is inserted. (MAX385VO only)
• When the operation panelis open, the touch panel
should
not
be
operated. (MAX385VO only)
Adjusting the angle
of
the operation
panel
The angle of the operation panel can be adjusted
in the range of
00
to
30
0
.
1.
Keep pressing the
[OA]
(OPEN/CLOSE) button
more than 2 seconds.
A beep will sound and the operation panel
will start moving.
~
...
- ...
~
I
:0-1-1'1-11.
1:
__
,,-
.
'---L_
2. When the operation panel is moved to your
desired angle, release the button.
The operation panel will stop.
3. For the VRX485VD, simply adjust your
desired angle by pressing the
[v]
or
[A]
tilt
buttons on your control panel.
Adjusting the balance/fader
1.
Touch the BALANCE
or
FADER in the
audio menu.
2.
Touch the [F ] or
[R]
key to adjust to the
fader level.
• The factory default setting is "0".
(Adjustment range: front 9 to rear -9)
3.
Touch the [L] or [R] key to adjust to the
balance level.
• The factory default setting is "0".
(Adjustment range: left -9 to right
9)
Adjusting the BASS
The bass gain and bass frequency can be
adjusted as follows.
1.
Enter the Audio settings menu.
2.
Touch the [-]
or
[+]
key to set the desirable
level.
GAIN:
-7
to 7 (The factory default setting is "0")
3.
To set the bass center frequency, enter
the ASP adjustment in the SETTING menu.
Adjusting the TREBLE
The treble gain and treble frequency can be
adjusted as follows.
1.
Enter the Audio settings menu.
2.
Touch the [-]
or
[+] key to set the desirable
level.
GAIN:
-7
to 7 (The factory default setting is "0".)
3.
To set the treble center frequency, enter
the ASP adjustment in the SETTING menu.
VRX485VD/MAX385VD
18