18 VMA8582 (U)
English
Owner’s Manual
Television Broadcast System: PAL/NTSC Setting
When a car video player, video camera or TV tuner is connected to the AV INPUT terminal (AV1 or
AV2) of the control box to input video signal, you can select the broadcast system (PAL/NTSC).
Note:
Since the factory default setting is “NTSC”, use the following procedure to set the broadcast system to
PAL.
POWER FUNC WIDE MENU
1. Press the FUNC button to switch the video
mode to and .
Press the MENU button.
Select “PAL/NTSC SELECT” using the ▼ and
▼ buttons.
Press the MENU button to execute the set-
ting.
2. Select “PAL” or “NTSC” using the ▼ and ▲
buttons.
Press the MENU button to execute the set-
ting.
DOWN/UP SELECT
MENU
AUTOMATIC DIMMER
DIMMER SELECT
INPUT SELECT
PAL/NTSC SELECT
PICTURE MENU
END
SELECT SET
MENU
PAL/NTSC SELECT
PAL
NTSC
AV1
AV1
AV2
AV2