Filter
Top Products
VZ309 31
English
Source unit ..................................................... 1
Owner’s manual and Installation manual ........ 1
Mounting bracket ............................................ 1
Machine screws M5x6 mm ............................. 4
Mounting bolt (50 mm) .................................... 1
Parking wire .................................................... 1
Removable face plate case ............................ 1
Trim plate ................................... 1
T-key .......................................... 2
Rubber cushion ......................... 1
Remote control unit ................... 1
Battery (CR2025) ...................... 1
(Installed in remote control)
4. Cautions on Installation
1. Prepare all articles necessary for
installing the source unit before starting.
2. Install the unit within 30° of the
horizontal plane. (Figure 2)
3. If you have to do any work on the car
body, such as drilling holes, consult your
car dealer beforehand.
4. Use the enclosed screws for installation.
Using other screws can cause damage.
(Figure 3)
5. Installing the Source Unit
1. Place the mounting bracket into the instrument panel, use a screwdriver to bend each
stopper of the universal mounting bracket inward, then secure the stopper as shown in
Figure 4.
2. Wire as shown in Section 8. .
3. Insert the source unit into the mounting bracket until it locks.
4. Take care of the top and bottom of the outer escutcheon and mount it so that all the
hooks are locked.
Notes:
1) Some car models require special mounting kits for proper installation.
Consult your Clarion dealer for details.
2) Fasten the front stopper securely to prevent the source unit from coming loose.
• Console opening dimensions
(182 mm)
7-3/16"
2-1/8
"
Hole
53 mm