Dell S1709W Car Video System User Manual


  Open as PDF
of 27
 
OSD Warning Messages
The following warning messages may appear on the screen indicating that the monitor is out of synchronization.
This means that the monitor cannot synchronize with the signal that it receives from the computer. Either the signal is too high or too low for the monitor to
use.SeeSpecificationsfortheHorizontalandVerticalfrequencyrangesaddressablebythismonitor.Recommendedmodeis1440X900@60Hz.
NOTE: You can also lock or unlock the OSD by pushing and holding the button for 15 seconds.
DCC/CI
DisplayDataChannel/CommandInterfaceallowsyoutoadjustthemonitorparameters(brightness,color,balance,etc.)using
softwareapplicationsonyourcomputer.YoucandisablethisfeaturebyselectingDisable
. The following warning message appears:
Select Yes to disable DDC/CI and No to exit with out making changes.

NOTE: Forbestuserexperienceandoptimumperformanceofyourmonitor,keepthisfeatureenabled.

LCD Conditioning
Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. You can
enable this feature by selecting Enable. The following error message appears:
Select Yes to start LCD conditioning and No to quit without making changes.
Factory Reset
ResetstheOSDmenuoptionstothefactorypresetvalues.
Reset All Setings:Changesalltheuser-adjustable settings including color, position, brightness, contrast,
menu transparency, and OSD hold
timetothefactorydefaults.ThelanguageoftheOSDdoesnotchange.
NOTE: The floating Dell Self-testFeatureCheckdialogappearson-screenifthemonitorcannotsenseavideosignal.
 previous next