Filter
Top Products
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment), use the cable management slot to
neatly organize all cables as shown above.
Attaching the Optional Dell Soundbar
Removing the Base
3.
Connect the power cable.
4.
Turn on your monitor and computer. If you do not see an image, see Troubleshooting your monitor.
NOTICE: Do not use with any device other than Dell Soundbar.
1.
Working from the rear of the monitor, attach the Soundbar aligning the two slots with the two tabs along the bottom rear of the monitor.
2.
Slide the Soundbar to the left until it snaps into place.
3.
Connect the Soundbar to the external power adapter.
4.
Insert the lime-green mini stereo plug from the rear of the Soundbar into the computer's audio output jack.
To remove the base of the stand from the monitor:
1.
Placethemonitorpanelonsoftclothorcushiononastableflattable.
2.
Turn the thumb screw counter-clockwise to loosen the base and raiser.
3.
Detach the base away from the monitor stand raiser.