Filter
Top Products
10
ENGLISH
When playing back Dolby Digital Plus/Dolby TrueHD/DTS-HD audio recorded on a BD disc, this unit outputs
Dolby Digital or DTS bitstream from its digital audio output terminal.
NOTE
•Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals are not output with this connection.
When outputting Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals, do so with an HDMI connection
(vpage4).
•Super Audio CD’s DSD signal cannot be output. Also, during CD layer playback, 44.1 kHz/16-bit Linear
PCM is output.
•Do not output DTS audio signals to an AV receiver that does not support DTS. Playing back a BD/DVD
disc with recorded DTS content can generate noise and even damage your speakers.
Connecting to an AV receiver with a digital audio input terminal
This connection is recommended when the specifications of an AV Receiver connected to the unit are as
follows:
•NotsupportingHDMIinput
•Supportingdigitalaudio(coaxial)input
This connection enables faithfully playing a disc that supports 5.1-channel output.
Cables used for connections
Audio cable
Coaxial digital
cable
(Sold separately)
(Black)
Video cables
Video cable
(Yellow)
Component video
cable
(Sold separately)
(Green)
(Blue)
(Red)
AUDIO
COAXIAL
IN
VIDEO
VIDEO IN
Y
P
B
PR
COMPONENT
VIDEO IN
VIDEO IN
AUDIO IN
AV Receiver
Connecting to an AV receiver
1.DBP-1611E3_ENG_0702.indd 10 2010/07/05 17:24:12