Filter
Top Products
12
ENGLISH
Connecting a 2-channel audio amplifier
This connection is for playback of audio of this unit, using a 2-channel audio device.
Connect to the 2ch Audio Out terminals of this unit.
For software recorded in multi-channel, an analog signal down-mixed to 2 channels is output.
Cables used for connections
Audio cable
Audio cable
(White)
(Red)
R
L
R
L
Connecting to a device with analog 2-channel audio input
terminals (2ch Audio OUT)
For normal 2-channel playback, use this connection.
AUDIO
AUDIO
IN
L
R
R
L
R
L
AUDIO
Amplifier
Connecting to a digital recording device
This connection is for recording audio from this unit, using an audio device with coaxial digital audio input
terminals.
Cables used for connections
Audio cable
Coaxial digital
cable
(Sold separately)
(Black)
AUDIO
COAXIAL
IN
Recorder
n “Down Sampling” (vpage38)
When multi-channel audio is to be converted to 2-channel audio and output, change the setting for a
connected Coaxial digital output to PCM from Bitstream, then make the setting for the sampling rate
for digital audio output, depending on the device.
If you play back BD/DVD or other media with an incorrect configuration, a deafening noise occurs that
may damage your speakers.
1.DBP-1611E3_ENG_0702.indd 12 2010/07/05 17:24:12