Filter
Top Products
28
ENGLISH
Setting the timer [Timer]
This device can playback using the timer playback (everyday timer,
once timer).
• This unit's timer does not support exit time settings for timer
playback.
n Timer operation when the time settings for
timers overlap
When the once timer and everyday timer are both
set (sleep timer is not set)
• Automatically starts playback at the earlier timer start time set for
either of the timers.
If the current time is not set, enter timer setting mode to get time
setting mode.
Setting the everyday timer and once timer
• Everyday timer (“Everyday”)
Playback starts at the set times each day.
• Once timer (“Once”)
Playback starts once only at the set times.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display. (vpage27 “Menu map”)
2
Use ui to select “Timer”, then press [ENTER],
<1/3
ENTER
> or p.
3
Use ui to select the timer mode, and use o p to
select “On” or “Off” then press [ENTER], or <1/3
ENTER
>.
4
Use ui to select “Set Time”, then press [ENTER],
<1/3
ENTER
> or p.
5
Use ui to select “hours” – “minutes” for the timer
start time, then press [ENTER], <1/3
ENTER
> or
p.
6
Use ui to select “Source”, then press [ENTER],
<1/3
ENTER
> or p.
7
Use ui to select the input source, then press
[ENTER], <1/3
ENTER
> or p.
Favorite Preset CD
iPodUSB
8
Use ui to select the “Volume”, then press
[ENTER], <1/3
ENTER
> or p.
9
Use ui to select the volume “0 – 60”, then press
[ENTER], <1/3
ENTER
> or p.
10
Press ON/STANDBY to set the power to standby.
Timer standby mode is set, and the power indicator lights
orange.
NOTE
• If the unit or remote control is not operated for 90 minutes or more
when the timer is set to on, the standby mode is activated.
• When using timer playback on an iPod Touch or iPhone, set the iPod
Touch or iPhone to “Sleep” mode. If the power is switched off using
the power off operation, timer playback cannot be used.
For details on the “Sleep” mode of the iPod Touch or iPhone, see
the instruction manuals of the products or related web pages.
n Setting the timer to on or off
Perform the operations at “Setting the timer [Timer]” (vpage28).
• When set to “OFF”, time operation is disabled, but the timer
settings remain unchanged.
n To check the timer settings
Perform the operations at “Setting the timer [Timer]” (vpage28).
n To change the timer settings
Perform the operations at “Setting the timer [Timer]” (vpage28).
n To change the setting while setting the timer
Press o.
The setting returns to the previous step. Display the setting you
want to change, then make the desired setting.
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this manual
u
o
p
[ENTER]
ON/STANDBY
i
[MENU]
[CLOCK]
/&5803,$%3&$&*7&33$%/
p
i
<1/3 ENTER>
o
u
ON/STANDBY