7
6
Press and hold AUDIO/MENU for more than 3 seconds to
access the setup menu, then press AUDIO/MENU to cycle
through menu options. When desired option appears in the
display, rotate the rotary encoderleft/righttoadjustoractivate
the desired function. Press ESCtoexitthemenuatanytime.
Setup Menu
MXDM66 OPERATION
General Operation
Setup Menu
Menu Function Options Action
Auto Station
Store
AUTOSTORE
Press SELECTtoseekandsave6strongstationsinthecurrentband.
Note: This option only appears in Tuner mode.
Loudness
Curve
LOUD OFF
Disables the loudness function.
LOUD ON
Enablestheloudnessfunction.Activatingthisfeaturewillenhancethe
bassandtreblefrequencieswhenlisteningtomusicatlowvolumes.
Tuner Frequency
Spacing
FREQUSA
ProgramsunittoUSAtunerspacing.
(200kHz for FM and 10kHz for AM)
FREQEUR
ProgramsunittoEuropeantunerspacing.
(50kHz for FM and 9kHz for AM)
Clock
Display
CLKOFF
Programs unit to not display the clock when the power is off.
CLKON
Programs unit to display the clock when the power is off.
Auxiliary
Input
AUX ON
Enablesthefrontpanel3.5mmauxiliaryinput.
AUX OFF
Disablestheauxiliaryinput.
Beep Confirmation
BEEPOFF Disables the confirmation beep.
BEEPON
Enablestheconfirmationbeep.
Programmable
Turn On Volume
PRO-VOL#
Programsunittoturnonataspecificvolume
(default is OFF).
Local/Distance
Tuning
LOCALOFF
Activatesdistancetuning.
LOCALON
Activateslocaltuningforstrongstationreceptiononly.
Power on Message
MSGOFF
Disables power on message.
MSGON
Enablespoweronmessagetobedisplayed.
Scrolling
Option
SCROLLONCE
Programs unit to scroll once, then show the first 10 characters on the
display.
SCROLLON
Programs unit to scroll continuously.
SCROLLOFF
Programs unit to show the first 10 characters on the display.
Illumination
Dimmer
DIMMERHI
Programsunittothebrightestilluminationlevel.
DIMMERMED
Programsunittothemiddleilluminationlevel.
DIMMERLOW
Programsunittothedimmestilluminationlevel.
Demonstration
Mode
DEMOOFF
Disables the demonstration mode.
DEMOON
Enablesthe"FULLSPEEDUSBINPUT"message.
Faceplate Removal
Semi-Permanent
Faceplate Installation
Power On/Off
Mode
Auxiliary Input
Volume
Mute
Preset EQ Curves
Reset
Display
Set the Clock
12/24-hour Clock
General Operation
MXDM66 OPERATION
Press RELEASEandpullawayfromtheleftsidetoremove.
Tore-install,insertrightsideoffaceplatefirstthenpush
left side to secure.
Removetrimringandinstallsupplied#1x7/32”Phillips
head screw through left side of mounting frame into faceplate.
Press oranyotherbutton(excepteject)toturntheunit
on.Insertingadiscwillturntheunitonautomatically.Press
and hold to turn the unit off.
Press MODEtoselectbetweenAM/FM,CDplayer,auxiliary
inputandUSB.Modesofoperationareindicatedinthe
display.
Note:CDmodewillnotappearunlessaCDisinserted.
Insert3.5mmplugtoconnectyourportableaudiodevice.
Adjustvolumeusingrotaryencoder(00-46).
Press MUTEtosilencetheaudio.“MUTE”willflashinthe
display. Press MUTE again to cancel.
Press EQ toenterEQsetupmenu,thenusetherotary
encodertoselectbetweenPOP,JAZZ,CLASSIC,BEAT,ROCK
andFLAT(default)equalizationcurves.Anyadjustmentto
theBassorTreblesettingsautomaticallycancelsthecurrent
EQcurve(ifoneisselected).
Press to RESET the unit upon initial installation or if
abnormal operation occurs. The reset button is located
behind the faceplate.
Press DISP to select between clock and different types of
information,suchasradiofrequency,CDtrackorMP3/USB
song information.
With the unit on, press and hold DISP until the clock begins
to flash, then release. Press TUNE
nn
toadjustthe
hours and TUNE
ll
toadjusttheminutes.PressDISP
momentarilytosavetheselectedtime.
Theclockwilldisplay12-hourAM/PMtimeinUSAfrequency
spacing mode (PM 10
:
00).InEuropeanfrequencyspacing
mode,theclockwilldisplay24-hourtime(22:00).