Dual MXDM66 Car Stereo System User Manual


  Open as PDF
of 13
 
9
8
MXDM66 OPERATION
Seek Tuning
Manual Tuning
Scan Tuning
Band 
Storing and Recalling 
Station Presets
Preset Scan
Press TUNE
nn
or TUNE 
ll
for more than one second to
seekthenextstrongstation.
Press TUNE
nn
or TUNE 
ll
momentarily tomoveradio
frequencyupordownonestepatatime.Pressandholdto
advancequickly.
Press SCANtopreviewstrongstationsonthecurrentband,
pausingforfivesecondsateach.PressSCAN again to
cancel.
Press BAND to select between FM1, FM2, FM3, AM1 and
AM2 bands.
Up to 18 FM stations and 12 AM stations can be stored. To
store a station, select the desired band and station. Press
andholdthedesiredpresetbutton(1-6)formorethan
two seconds. When stored, the preset number will appear in
the display. The station can be recalled anytime by pressing
the corresponding preset button.
Press PSformorethantwosecondstoscanpresets1-6on
thecurrentband,pausingforfivesecondsateach.Press
PS again to cancel.
AM/FM Tuner Operation
MXDM66 OPERATION
Press ESCtoexitanymenuadjustmentmode.
Press AUDIO/MENU momentarily to select between Volume
(default),Bass,Treble,Balance,Fader,Subwooferand
SourceVolumeLevel.
Press AUDIO/MENU until BASS appears, then press SELECT 
toconfirm.Rotateencoderleft/righttoadjust(-6minimum/
+6maximum).
Press AUDIO/MENU until TREBLE appears, then press
SELECT toconfirm.Rotateencoderleft/righttoadjust(-6
minimum/+6maximum).
Note: AnyadjustmenttotheBassorTreblesettings
automaticallycancelsthecurrentEQcurve(ifoneis
selected).
Note:BassandTreblesettingsareretainedforeachmode
individually.
Press AUDIO/MENU until BAL appears, then press SELECT 
toconfirm.Rotateencoderleft/righttoadjust
(BALL12-BAL
00-BALR12).BAL00representsequalbalance.
Press AUDIO/MENU until FADER appears, then press
SELECT toconfirm.Rotateencoderleft/righttoadjust(FAD
F12-FAD00-FADR12).FAD00representsequalfader.
Press AUDIO/MENU until SUB-W appears, then press
SELECT toconfirm.Rotateencoderleft/righttoadjust(0-12).
Adjustinglevelsto0turnsthesubwooferoff.
Thesourcevolumelevelcontrolallowsagainadjustment
foreachaudiosource:AM,FM,CD,AUXandUSB.Setthe
sourcevolumelevelforeachmode,dependingonthe
relativevolumeofeachaudiosource.
Tosetthesourcevolumelevel,pressAUDIO/MENU until
SRCLEVELappears.Afteronesecond,thecurrentmode
willappearonthedisplay.Turntherotaryencodertoadjust
theaudiolevelofthecurrentsource(-6minimum/+6
maximum).
Note: Onlythecurrentmodewillbeavailablefor
adjustment.Toadjustanothermodeofoperation,press
MODE until the desired mode is selected, then set the
sourcevolumelevelforthatmode.
Escape
Audio
Bass
Treble
Balance
Fader
Subwoofer
Source Volume Level
General Operation
BASS VOLUME TREBLE BALANCEFADER
SUBWOOFER SOURCE LEVEL
 previous next