Eclipse - Fujitsu Ten CD5423 Car Stereo System User Manual


 
25
Basic operation
ATTENTION
To disable the loudness feature, repeat the above procedure to
display the [LOUD OFF] indication.
Adjusts left/right speaker balance.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes right speakers.
Turn to the left: Emphasizes left speakers.
BAL (BALANCE) Mode
Adjusts front/rear speaker balance.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes front speakers.
Turn to the left: Emphasizes rear speakers.
FAD (FADER) Mode
Adjusts non-fader level (for connected sub-woofers, etc.).
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Increases level.
Turn to the left: Decreases level.
NON-F (NON-FADER) Mode
The loudness control may be turned on to emphasize low and high
frequencies at low volume levels.
Loudness compensates for the apparent weakness of low and high
frequencies at low volume by boosting the bass and treble levels.
Enabling the loudness control
Press and hold the [AUDIO CONTROL] button until the
[LOUD ON] display appears on the screen.
1
[AUDIO CONTROL] button