Filter
Top Products
82
If you have a question:
Information Code Table When "INFO " flashes on the indicator
Nos.2~7 are displayed.
Information Contents Explanation and remedial action to take
2 NO DISC LOADED IN There is no disc in the magazine or player. Load
THE MAGAZINE a disc in the magazine. (Load a music disc.)
3 DISCS ARE DIRTY OR The loaded disc is dirty or upside down. Check
DAMAGED it for proper orientation and verify it is clean.
5
CD PLAYER AND CD
•The CD player and CD changer is inoperative for
CHANGER FAILS
some reason. Go through the magazine removal
MECHANICALLY
procedure.
•If a magazine fails to eject, have your dealer fix
the problem.
6
WHEN THE CD CHANGER
•The temperature in the CD changer is too high for
INTERNAL TEMPERATURE IS
operation. Wait till it cools down.
HIGH (TO PROTECT PICKUP
•Resume playing after the “High temperature sensed
UNIT)
and CD stopped" display disappears. If the CD still
cannot play, have your dealer repair it.
7 AN INTERNAL POWER •Turn the ACC off once before turning it on once
SUPPLY FAILURE IS again to resume the operation.
OCCURRING WITH THE •If the function still cannot be restricted, contact your
AUTO CHANGER dealer.
Information Contents Explanation and remedial action to take
LOAD CD changer is in the process of verifying the
presence of CDs after a magazine has been inserted
into the CD changer.
Displayed information (for troubleshooting)
The information listed in the chart below is displayed to show the
status of the CD player and CD changer. Refer to the chart for the
appropriate action.