Filter
Top Products
SAFETY INSTRUCTIONS
The following label has been affixed to the unit, listing the proper procedure for working with the laser beam:
CLASS 1 LASER PRODUCT LABEL -
This label is attached to the place as illustrated to inform that the apparatus
contains a laser component.
WARNING LABEL INFORMING OF RADIATION -
This label is placed inside the unit as shown in the illustration to warn against
further measures on the unit.
The equipment contains a laser radiating laser rays according to the limit of laser
product of class 1.
The lightning flash with arrowhead
symbol within an equilateral
triangle, is intended to alert the
user to the presence of
uninsulated dangerous voltage
within the products enclosure that
may be of sufficient magnitude to
constitude a risk of electric shock
to persons.
CAUTION
RISK OF ELECTRIC SHOCK,
DO NOT OPEN
WARNING: TO REDUCE FIRE OR SHOCK
HAZARD DO NOT OPEN THE HOUSING OF
THE APPLIANCE.
THERE ARE NO USER-SERVICABLE PARTS IN
THE APPLIANCE.
ALL SERVICING SOULD BE REFERRED TO
QUALIFIED SERVICE PERSONNEL
The exclamation mark within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing) instructions
within literature accompanying the
equipment.
• READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated.
• REMAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference.
• HEED WARNINGS -
All warnings on the appliance and in the operating instructions should be adhered to.
• FOLLOW INSTRUCTIONS - All operating instructions should be followed.
• WATER AND MOISTURE - The appliance should not be used near water, for example, near a bathtub, washbowl, kitchen sink, laundrytub,
swimming pool or in a wet basement.
• VENTILATION -
The appliance should be situated so that its location or position does not interfere with its proper ventilation.
For situated on bed, sofa, rug or similar surface that may block the ventilation openings, placed in a built-in installation, such as a bookcase or
cabinet that may impede the flow of air through the ventilation openings.
• HEAT -
The appliance should be situated away from heat sources such as radiators, stoves, or other appliances (including amplifiers) that
produce heat.
• POWER SOURCE - The appliance should be connected to power supply only of the type described in the operating instructions or as marked
on the appliance.
• GROUNDING - Precautions should be taken to ensure that the grounding means of an appliance is not defeated.
• POWER CORD PROTECTION - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them.
• POWER LINES - An out door antenna should be located away from power lines.
• OBJECT and LIQUID ENTRY -
Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.
• DAMAGE REQUIRING SERVICE -
The appliance should be serviced by qualified service personnel when:
- The power-supply cord or plug has been damaged.
- Objects have fallen into, or liquid has been spilled into the appliance enclosure.
- The appliance has been exposed to rain.
- The appliance has been dropped, or the enclosure damaged.
- The appliance does not appear to operate performance.
CLASS 1 LASER PRODUCT
KLASS 1 LASER APPARAT
LUOKAN 1 LASERLAITE
KLASSE 1 LASER PRODUCT
MODEL 7550
CAR RADIO WITH TFT DISPLAY AND DVD PLAYER
30.