Filter
Top Products
44.
3 In USB mode (when the disc is in the unit)
Press the SETUP button once, and then press the GOTO button, the unit will change the DISC mode to play, in
DVD/VCD/CD mode.
Press the SETUP button twice, and then press the GOTO button, the unit will change the USB mode to play in
MP3 mode.
Press the SETUP button once and then press the GOTO button, the unit will change the USB mode to play.
Note:
• To prevent damage to the USB, during the playback don’t pull out.
• In the state of the DISC playing, Best to pull out the USB.
On-Screen Display Function
Press the OSD button during playback to display the contents of the current disc on the screen.
Example for DVD:
• Press OSD for the first time:
Title number, Total Title Number, Chapter Number, Total Chapter Number of this Title of the disc currently being played
will be shown on the screen, along with the elapsed time.
• Press OSD for the second time:
• Press OSD for the third time:
(Fig. 1)
(USB connect line)
USB Port
Note (for the brake function)
If the parking brake is not engaged, “parking brake” flashes on the monitor, and no playback picture will be shown. Only the
audio will be heard. This warning appears only when the parking brake wire is connected to the parking brake system built
in the car.
USB Operation
1. Plug the USB connect to the USB socket of the unit properly, (see fig.1) when the USB appliance connect to the USB
port of the connect line, the system star playing track of the USB appliance automatically.
2. In the USB playing, you can press the cursor button to select the item. Then press ENTER button to playing. Also press
numeric to play the corresponding track directly. Press the / button to skip to the next track or skip to the back one
track Press the / button to fast forward or fast reverse. Press the REPEAT button to select repeat play mode.
You can press the EJECT button to eject the disc or insert the disc into the compartment. When insert the disc, the unit
will play the disc automatically.