Filter
Top Products
43.
In Stop mode, use / / / on the remote control to select the item or folder, then press ENTER button to confirm.
Pressing REPEAT button repeatedly can select two kinds of repeat play mode.
2. REP-ONE:
Play the same song over and over again.
3. REP-ALL:
Play all songs on the discover and over again.
In the playback, use or to skip an item ahead or back.
In the playback, face right or left swing the SEL knob / button (more than 2 seconds) on the front panel or short
press / on the remote control to rapid forward/reverse.
Scroll Caption Adjustment
In radio mode:
You can adjust your desired scroll caption, the method of the operation as follow:
a). Press and hold the SETUP button (for about 2 seconds) on the remote control, the adjustment scroll bar will displayed
on screen.
b). Use the VOL+/- button to select between “A, B, C ....X, Y, Z, and blank”, and use the / button on the front panel to
proceed/cancel , and press the SETUP button briefly to confirm (press the SETUP button long again to renew).
24. AUX IN
Input for additional device.
25. LCD DISPLAY
Displays video and additional information.
26. USB port
USB port for external USB device.
AUX INPUT JACK
When the unit connect external A/V (See number 24), you can press MODE to switch the AUX input mode.
TFT monitor operation
1 Press the SEL button (3) repeatedly during DVD/CD mode to display the adjustment items on the screen (25). And then
face up or down swing the VOL +/- buttons to adjust the selected item (The corresponding value will be shown on the
display)
2 Adjustable items:
COLOR: 0 to 32
Adjust the color fo the picture-lighter or darker
BRIGHT: 0 to 32
Adjust if the picture is too bright or too dark
CONTRAST: 0 to 32
Adjust the contrast of the bright ans dark portion.
TINT: 0 to 32
Adjust the tint if the human skin color is unnatural.
- Adjustable when “NTSC” is selected for “NTSC/PAL”.
(The function of the VOLUME, BASS, TREBLE, BALANCE and FADER, Please see relevant chapter)
Rear view camera
When connecting the rear view camera. the mirror image of the rear view through the rear view camera is automatically
displayed on the monitor when you change the gear to the back position (the monitor on the unit only).