Filter
Top Products
3
3
.
.
1
1
0
0
C
C
o
o
n
n
t
t
r
r
o
o
l
l
S
S
e
e
t
t
u
u
p
p
M
M
e
e
n
n
u
u
Diagram 3.19
Diagram 3.19 is a screen shot of the Control Setting Menu. This menu is for setting up a connection
from the digital recorder to a computer to transfer instructions or information using a keyboard or
software. In the Control Setting Menu the following fields are defined as follows:
RS232:
1. RS232 Baud Rate: This field is to set the speed at which is used to transmit instruction or
information through RS232 on the DVR. There are six different speeds, 1200 BPS, 2400 BPS,
4800 BPS, 9600 BPS, 19200 BPS, and 38400 BPS. The default setting from the factory is 9600
BPS. To change this, simply use the Jog Dial on the DVR.
2. RS232 Stop Bit: This field is to set the stop bit for the RS232 connection. There are two
different stop bits, 1 or 2. The default in the DVR is set to 1. To change this, simply use the Jog
Dial on the DVR.
3. RS232 Parity: This field is to select the parity level at which you will be connected. You can
choose between None, Odd, or Even parity levels. Default is set to none. To change this, simply
use the Jog Dial on the DVR.
4. RS232 Data Bit: This field is the data bit at which you will be transferring. There are two
settings for this option: 8 or 7. The default is set to 8. To change this, simply use the Jog Dial on
the DVR.