Filter
Top Products
RS485:
5. RS485 Baud Rate: This field is to set the speed at which is used to transmit instruction or
information through RS485 on the DVR. There are six different speeds, 2400, 4800, 9600,
19200, 38400 and 57600BPS. The default setting from the factory is 9600 BPS. To change
this, simply use the Jog Dial on the DVR.
6. RS485 Stop Bit: This field is to set the stop bit for the RS485 connection. There are two different
stop bits, 1 or 2. The default in the DVR is set to 1. To change this, simply use the Jog Dial on the
DVR.
7. RS485 Parity: This field is to select the parity level at which you will be connected. You can
choose between None, Odd, or Even parity levels. Default is set to none. To change this, simply
use the Jog Dial on the DVR.
8. RS485 Data Bit: This field is the data bit at which you will be transferring. There are two
settings for this option: 8 or 7. The default is set to 8. To change this, simply use the Jog Dial on
the DVR.
9. RS232/RS485 ID: This entry is used to assign individual ID codes if more than one unit is used
through the RS232/RS485 connection. The ID code for the DVR can be set from 001-255. The
default is set to 001. To change this, simply use the Jog Dial on the DVR.
10. PTZ PROTOCOL: Select PTZ protocol from EVERFOCUS, PELCO-D, PELCO-P and
ED2200/2250.