Filter
Top Products
Note:
1. If you only want to record event (motion or alarm) activity ONLY, set the normal record speed as 0
IPS in the CAMERA SETUP MENU.
2. If the recording speed is changed while the machine is recording, the new recording speed will not
take effect until recording is completely stopped and then reactivated.
DVR provides a record function which is triggered by external signal via the 19th pin of the ALARM
INPUT / OUTPUT port. When the record input signal is triggered constantly, DVR will start to record
according to the speeds set on Time Period (TP) N. The system will stop recording when the record
input signal is no longer triggered.
Note: Please check APPENDIX B to see other available alarm input/output details.