Filter
Top Products
6. REC SPEED & ACTION:
TP: Scheduled recording time 1~8 which can be set in the SCHEDULE SETUP MENU. “N” is
the normal recording time, which is activated by pressing the Record button. If you have set a Time
Period in Schedule Setup Menu, then there will be a star sign (*) beside that TP in Camera Setup
Menu.
NORMAL: Normal record speed up to 15 IPS (images per second). The default normal record
speed is 1 IPS. EDR810/410 will adjust to the maximum recording speed by calculating the total
installed cameras that have been enabled in the CAMERA SETUP MENU.
EVENT: Event record speed (Images per second) up to 30 IPS or “OFF”.
Note: In order to activate a new record speed, you need to disable all current record actions and
then turn them back on.
ACTION
Set “ON” to activate motion action on a selected Time Period.
Set “OFF” to disable motion action on a selected Time Period.
This setting correlates closely with Motion Setup. If motion setting is disabled, motion detection
will not function regardless if TP (Time Period) Action in Camera Setup Menu is ON or OFF.
However, if Motion setting is enabled, then motion detection function works depending on
Action setting in Camera Setup Menu. All motion actions (including buzzer, relay, network alarm,
e-mail and log) will be triggered if they are enabled in Motion Setup Menu as long as Action is
“ON” for the TP (Time Period) you have set. If you do not wish to have motion detected for a
specific time, set Action “OFF” for that Time Period. This function gives you flexibility to set the
motion detection feature ON or OFF for different Time Periods.