EverFocus EDR810H Car Stereo System User Manual


 
3.7.2 ALARM NETWORK
DVR can send out Alarm message to an Alarm Server. This function is reserved to work with our
Control Management System PowerCon 4. In the ALARM of the NETWORK SETUP MENU,
we define:
Diagram 3.11
1. PROTOCOL: Select which communication protocol with Alarm servers or Alarm receiving
clients.
TCP: communicate with client via TCP protocol.
UDP: communicate with client via UDP protocol
2. PORT NUMBER: setting the communication port with Alarm server. The default is 1600.
3. UNIQUE ID: setting the ID number of your DVR to Alarm server.
4. SERVER 1: assign the IP address of Alarm server 1.
5. SERVER 2: assign the IP address of Alarm server 2.
6. SERVER 3: assign the IP address of Alarm server 3.