Filter
Top Products
7. SUMMARY:
Diagram 3.5
Dial Jog to change items in the SUMMARY table.
All cameras’ statuses are shown in the SUMMARY table. The table is for checking camera overall
statuses only, not for changing them.
Note: The SUMMARY table also exists in ALARM, MOTION and VLOSS SETUP MENU. All of these
SUMMARY tables are also for checking particular overall statuses, not for changing them.
8. Copy camera’s setting from a camera to other cameras: In order to copy the setting from a
camera to other cameras, we provide a setting copy function. PressMENU when you finish setting up a
camera, and then press COPY. The word “COPIED” will show up in the top right corner of the
screen, and it means the settings have been copied. Dial the Jog to the camera you would like to copy
to, and then press SEARCH. The settings of the first camera will be copied to the next one, and
“PASTED” will show up in the top right corner.
NOTE: TITLE, PTZ ID, and INSTALL/COVERT cannot be copied. These 3 options need to be set
independently.