Extron electronic MTP 15 HD A Car Video System User Manual


 
ATTENTION:
Potential damage to property.
This product is intended to be supplied by a Listed Power Unit marked "Class 2"
or "LPS", rated 12 VDC, maximum 1.0 A. Always use a power supply supplied
or specified by Extron. Use of an unauthorized power supply voids all regulatory
compliance certification and may cause damage to the supply and the end product.
The installation must always be in accordance with the applicable provisions of
National Electrical Code ANSI/NFPA 70, article 75, and the Canadian Electrical Code
part 1, section 16. The power supply shall not be permanently fixed to building
structure or similar structure.
Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling
spaces or in wall cavities. The power supply is to be located within the same vicinity
as the Extron AV processing equipment in an ordinary location, Pollution Degree 2,
secured to the equipment rack within the dedicated closet, podium, or desk.
As an alternative, an Extron PS 124 Universal 12 VDC Power Supply (part number
60-1022-01) can power multiple MTPs or other Extron 12 VDC devices using only one AC
power connector.
MTP 15HD A Series • Installation and Operation 13