Filter
Top Products
3
Design Information
Dual Burner Outdoor Cooktop
Models
Available
Monogram Dual Burner Outdoor Cooktops
are factory set for LP or natural gas. Order the
model for your installation situation.
Liquid Propane
Model ZX2L SS
These models can be mounted to the right
side of a Monogram 27" wide grill which has
been installed on a cart.
These models can also be installed in a
combustible or non-combustible enclosure.
Natural Gas
Model ZX2N SS
Product
Dimensions
& Clearances
When installed on the side of a grill cart, allow
6" clearance at the rear and right side to
vertical combustible materials.
When installed in an enclosure, allow 6"
clearance at the rear and both sides to vertical
combustible materials.
When installed in a combustible enclosure,
the cooking surface should be 1" above
adjacent horizontal surfaces.
Accessories
Both LP and Natural gas models may be
installed on a 27" wide portable grill cart. Both
models are shipped with support brackets to
secure the burner to the right side of the cart.
Accessories should be ordered with the burner
and be on site at the time of installation.
ZX27QDC – LP Quick Disconnect Tee
For installation onto a 27" cart.
23-3/4"
25-3/4"
2"
13"
10-1/2"
ZX2TKYSS Trim Kit
For a built-in installation, the enclosure, can
be constructed of non-combustible (masonry)
material or of combustible material such as
wood. This trim kit conceals the back and side
edges of the opening.
ZX2JYSS Insulated Jacket
An insulated jacket is required when installing
into a combustible enclosure.
Advance
Planning
•Monogram Dual Burner Outdoor Cooktops
are designed to be installed on the right side
of a 27" grill cart or built into an enclosure.
•In a non-combustible (masonry) enclosure,
the burner drops into the opening. A solid
deck beneath is required for support from
the bottom.
•An insulated jacket is available to allow the
grill to be installed in a combustible
enclosure. The insulated jacket must be
supported from the bottom by a solid deck or
ledge on each side beneath the jacket.
•A trim kit is available for built-in installations
to conceal the back and sides of the opening.
Clearances:
•When installed on the side of a grill cart,
allow 6" clearance at the rear and right side
to vertical combustible materials.
•When installed in an enclosure, allow 6"
clearance at the rear and both sides to
vertical combustible materials.
•When installed in a combustible enclosure,
the cooking surface should be 1" above
adjacent horizontal surfaces.