Filter
Top Products
1. Press 5975
2. Immediately press the FREQU./METER button
3. Press 3 2
4. Immediately press the STORE button. If the display
flashes, it means that a frequency is already stored into
this memory. To overwrite it, immediately press STORE
again. If you do not want to overwrite it, start over and
use a different memory.
HOW TO ACCESS WHAT YOU HAVE STORED INTO
MEMORY
1. To access one specific memory, e.g. memory 25, press 2
5 then press either MEMO button
2. To review all filled memories, press either MEMO button
repeatedly.
3. To scan filled memories, press either MEMO button for
about one second, and then release it. Scan starts. To
stop scan, press any button.
STORING STATIONS INTO MEMORY
To store a station into memory, you must be tuned to that station.
Then you must decide which of the 40 memories to store it into.
Follow the easy steps outlined below.
HOW TO TELL WHICH MEMORIES ARE EMPTY
· To determine the next available memory, press the FREE
button once. The memory number is shown in the lower right
hand corner of the display.
· To see all availably memories, press the FREE button repeat-
edly. The empty memory numbers are shown in the lower right
corner of the display.
HOW TO STORE A FREQUENCY INTO MEMORY
There are 40 memories. Here is a specific example. To store
BBC’s evening frequency to North America, 5975 kilohertz, into
memory 32, do the following
11