Filter
Top Products
USING THE CLOCK, ALARM AND SLEEP TIMER FEATURES
This can be done with the radio on or off. The YB400PE’s clock
is a 24 hour clock only, e.g. 6’oclock in the morning will read as
6:00; 6 o’clock in the evening will read as 18:00. There are two
clocks, TIME I and TIME II. Select one or the other by pressing
the TIME 1/2 button. TIME I or TIME II shows in the display at
top center. Set the time using the examples below.
EXAMPLE 1: If it is 06:00 hours press 6 . 0 0, then immediately
press the TIME 1/2 button.
EXAMPLE 2: If it is 15:32 hours press 1 5 . 3 2, then immedi-
ately press the TIME 1/2 button.
HOW TO SET THE ALARM CLOCK
The alarm time is shown in the upper left corner of the display,
under “ON TIME,” when the radio is off.
To set the alarm to activate at 6:30:
1. Press 6 . 3 0 (be sure to include the decimal point)
2. Immediately press and release the ON TIME button.
3. Select the alarm mode using the AUTO button.
HOW TO CONTROL THE ALARM CLOCK
· Press the AUTO button several times while looking at the
upper left corner of the display.
· The “musical note” symbol wakes you to the radio playing the
last station it was set to.
· The “bell” symbol wakes you to a beeper sound.
· When both symbols disappear and -:— appears, THE
ALARM IS DEACTIVATED.
HOW TO USE THE ALARM CLOCK’S SNOOZE FEA-
TURE (button on top of radio)
Once the alarm has activated, you can get 5 minutes more sleep
by briefly pressing the SNOOZE button. You can repeat this as
many times as you like. By pressing the SNOOZE button for
more than 2 seconds, you can completely shut off the alarm.
13