Filter
Top Products
SUPPLYING POWER AND USING EXTERNAL ANTENNAS
NOTE: when using the adaptor, it is OK to leave batteries
in the radio.
HOW TO USE THE INCLUDED “REEL” ANTENNA AND
THE EXTERNAL ANTENNA SOCKET (left side of the radio)
The SW EXT. ANT. Socket is for shortwave antennas. Use it
with the included “reel” antenna. Always fully unroll the “reel”
antenna and place it as high off the floor as possible, next to the
windows.
PROFESSIONALLY ENGINEERED ANTENNAS
Professionally engineered, outdoor shortwave antennas, available
through specialized retailers, can also be used. Use the SW. EXT.
ANT. Socket mentioned above. The socket is a 1/8 inch mono
socket, used in conjunction with a 1/8 inch mono plug, such as the
plugs often used for mono earphones. If you would like advice
about shortwave antennas, please call Grundig technical support
at 1-800-872-2228 for U.S. and 1-800-637-1648 for Canada.
5
HOW TO INSTALL BATTERIES
Install six AA alkaline batteries. Follow the diagram imprinted on
the back of the radio near the battery compartment. With the
radio face down and the battery compartment toward you:
· The flat ends (-) of the bottom batteries
go toward the left.
· The flat ends (-) of the top batteries go
toward the right.
AC ADAPTOR USE
The Grundig adaptor supplied with this product is only for use in
the Americas, where household AC voltage is 110-120 volts AC.
Do not use this adaptor in countries with household AC voltage
of 220-240 volts AC.
USING YOUR GRUNDIG AC ADAPTOR
1. Plug the adaptor into a household outlet.
2. Insert plug into the radio’s DC 9 V socket.