Insignia NS-CD512 Car Stereo System User Manual


 
5
Insignia 5-Disc CD Player
www.insigniaproducts.com
Connecting analog audio
You can connect your CD player to a home theater
or receiver using analog audio.
To connect analog audio:
Connect a standard (analog) audio cable
(included) to the ANALOG OUT L/R audio jacks
on the back of your CD player and to the L/R
audio input jacks on a receiver or sound system.
Connecting headphones
To connect headphones:
Plug headphones into the PHONES jack on the
front of your CD player.
Connecting power
To connect power:
Plug the AC power cord into a power outlet.
Installing remote control batteries
To install remote control batteries:
1 Press the battery compartment cover latch, then
remove t
he cove
r.
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols in the battery compartment.
3 Replace the cover.
Note
You can use either digital or analog audio
connections, depening on the connection available
on your amplier or receiver.
Note
The headphone jack size is 1/4" (6.35 mm). You need
an adatper to connect headphones with a 3.5mm
audio jack connector.
n
en
a
AUDIO IN
The connectors on standard
audio cables are often
color-coded.
Plug the red cable connector
into the red jack and the
white cable connector into
the white jack.
Back of CD player
Analog audio cable
NS-CD512
Front of CD player
Cautions
Your CD player is not completely disconnected
from power when the power cord is plugged
into a power outlet. To completely disconnect
power, unplug the power cord.
Make sure that the power outlet is easily
accessible.
Unplug the power cord from the power outlet if
your CD player will not be used for an extended
period of time.
Cautions
Make sure that you insert the batteries correctly.
Do not use rechargable (Ni-Cd) batteries.
Do not heat, open, or short-circuit batteries.
Do not throw batteries into a re.
Do not mix dierent types of batteries or mix
old and new batteries.
If the remote control does not function correctly
or if the operating range becomes reduced,
replace the batteries.
MAD E IN C HIN A
MAD E IN C HIN A
NS-CD512_12-0721 _MAN_V4_ENG.book Page 5 Monday, July 2, 2012 2:35 PM