Filter
Top Products
To a PS/2 computer: Connect a PS/2 “Y” adapter, which comes with the unit,
to the PS/2 port on the PC side, then use two mini-DIN6 male-to-male cables
for the keyboard and mouse, as shown below. There are two mini-DIN6 female
connectors on the PS/2 “Y” adapter marked for the keyboard and mouse.
NOTE: Be sure not to swap the connections.
To a laptop computer: In most cases, all you need is one PS/2 male-to-male
cable connecting the KVM switch module and your laptop, as shown below;
the “Y” adapter is not necessary. However, as some laptop computers do not
follow the industry standard, check your laptop’s user manual for details.
Slim Models (Models 521796, 523561 and 523578):
Use only the cables shown
at right. Connection from a
slim KVM module to a PS/2
computer or a USB computer
is shown below.
8
INSTALLATION
For PS/2 computers connected to
IMM and IUM models (Models
521796, 523561, 523578).
For USB computers connected to IUM
models (Models 523561, 523578).