Filter
Top Products
0
Power On/Source Selector Buttons: Pressing one of these but-
tons will perform three actions at the same time. First, if the CS
system is not turned on, this will power up the unit. Next, it will
select the source shown on the button as the input to the CS
system. Finally, it will change the remote control so that it controls
the device selected.
1
Power Off Button: Puts the CS system in Standby mode.
2
Subtitle Button: When a DVD is playing, press to select a
subtitle language or to turn subtitles off.
3
Title Button: When a disc is playing, press to make the player
go back to the first section of the disc.
4
Angle Button: Press to access various camera angles on a
DVD (if the DVD contains multiple camera angles) or to rotate JPEG
images.
5
Audio Button: Press to access various audio languages on a
DVD (if the DVD contains multiple audio streams).
6
Enter Button: Press this button to activate a setting or option.
7
Open/Close Button: Press to open or close the disc tray.
8
Setup/OSD Button: Press to access the on-screen display
menu.
9
Arrow (
M
/
N
/
K
/
L
) Buttons: Use to move the cursor in
the OSD.
A
Mute Button: Mutes the sound.
B
Menu Button: Displays the actual DVD Disc menu on the TV
screen in Play mode. When playing discs with JPEG images,
pressing this button will access the thumbnails.
C
Pause Button: Freezes a picture (with DVD/VCD) and pauses
the playback signal (CD) when a disc is playing. Press again for
normal playback.
D
Status Button: Press while a disc is playing to view the banner
display. Use the Arrow
9
buttons to move through the different
features in the banner display. When a symbol is highlighted, press
Enter
6
on the remote to select it.
E
Skip/Step (Previous) Button: Press to go to the beginning of
the current track. Press again quickly to go to the beginning of the
previous track. After pressing the Pause
C
button, each press of
this button will move the image in reverse, frame by frame.
F
Skip/Step (Next) Button: Press to go to the beginning of the
next track. After pressing the Pause
C
button, each press of this
button will move the image forward, frame by frame.
G
Play Button: Begins to play the disc (closes disc tray first, if it
is open).
H
Search/Slow (Rev.) Button: Allows you to search in reverse
through a disc while it is in Play mode. Each time you press this
button, the search speed changes as indicated by a number of
arrows on the right top of your screen. After pressing the Pause
C
button, each press of this button will change the slow down
speed indicated by a number of arrows in the right top of the
screen.
I
Stop Button: Stops play of a disc. When a disc is playing, if you
press Stop
I
and Play
G
, the disc will resume play; i.e., it will
start from the same point on the disc where the unit was stopped.
If you press Stop
I
twice and the Play
G
button, the disc will
start play from the beginning.
J
Search/Slow (Fwd.) Button: Allows you to search forward
through a disc while it is in Play mode. Each time you press this
button, the search speed changes as indicated by a number of
arrows on the right top of your screen. After pressing the Pause
C
button, each press of this button will change the slow-down
speed as indicated by a number of arrows on the right top of the
screen.
K
Macro Buttons: Press these buttons to store or recall a
“Macro,” which is a preprogrammed sequence of commands stored
in the remote. (See page 29 for more information on storing and
recalling macros.)
L
Pic +/Pic – Buttons: Pressing these buttons in JPEG mode will
move to the previous or next image.
M
Zoom Button: When a DVD or VCD is playing, press this button
to zoom the picture so that it is enlarged. There are four steps to
the zoom function, each progressively larger. Press through each of
the zoom stages to return to a normal picture. The Zoom function is
not available when watching high-definition material.
N
Playlist Button: Press this button to change the playback order
of the disc.
O
Random Button: Press for Random playback in random order.
P
A-B Button: Press to select section A-B and to play repeatedly.
Q
Volume Up/Down Buttons: Increase/decrease the master
volume level.
R
Light Button: Press to illuminate remote control.
S
Numeric Keys: Select numbers by pressing these buttons.
T
Repeat Button: Press to go to the Repeat menu. You can repeat
a chapter, track or the entire disc.
U
Clear Button: Press to remove the Banner menu from the
screen.
V
Video Output Button: Press to toggle between the S-video,
component video outputs and SCART RGB video output of the CS
system player. Note that the composite and SCART composite
video outputs on the player are always active, which could help
you make your initial setup.
W
Video Format Button: Press this button to change the resolu-
tion of the Component Video Output between standard definition
and progressive definition (PAL interlaced and PAL progressive;
NTSC interlaced and NTSC progressive).
X
Learn Button: Press this button to begin the process of
“learning” the codes from another product’s remote into the CS
system’s remote. (See page 29 for more information on using the
remote’s learning function.)
Y
to
c
These buttons do not have a direct function with the
CS3/CS5, but can be programmed to control some of the functions
of your TV using the Learning function of the remote control.
d
IR Transmitter Window: Point this window toward the CS when
pressing buttons on the remote to make certain that infrared
commands are properly received.
e
Program Indicator: This three-color indicator is used to guide
you through the process of learning commands from a remote into
the CS’s remote code memory. (See page 29 for more information on
programming the remote.)
f
Mode Button: This button has no effect on the Cinema Sound
CS3/5, but enables you to switch the remote to another mode so that
it operates another device without selecting it as the source. This is
useful if, for example, you wish to adjust your video display screen
(TV mode) while watching a DVD (Disc Mode). Each press of the
Mode button changes the remote’s mode in this order: TV, DISC,
RADIO, AUX, D-IN, USB 1 and USB 2, and then back to TV again.
The corresponding Source Selector will light to indicate the mode.
12
REMOTE CONTROL