Filter
Top Products
21
HD5212
iPod Operation
Accessing iPod Mode
This unit is equipped with an iPod ready function that will allow you to
control your iPod (if compatible) using the front panel control buttons. The
following iPod versions are supported:
• iPod 3G (Firmware version 2.2 only)
•iPod Mini
•iPod Photo
•iPod Nano
• iPod 5G (Video)
The unit will automatically switch to iPod mode when an iPod is plugged
into the iPod cable. To return to the iPod menu from any other source menu,
press the SRC button (2) on the front panel or remote control until “IPO”
appears on the display.
NOTE: The HD5212 will not select video files regardless of whether or
not a video file was the last file playing when the iPod was plugged
into the radio. Only music files are supported.
Turning the iPod On/Off
The iPod power turns on automatically when the iPod is connected to 30-
pin iPod cable, as long as the automobile ignition is turned on. You can turn
the iPod off by disconnecting it from the cable or by turning the ignition off.
When the ignition is turned off, the iPod will pause and then enter sleep
mode after 2 minutes.
NOTE: The iPod will continuously recharge when connected to unit,
as long as the vehicle ignition is turned on.
Display Information
iPod song information, when available, appears on the LCD screen
automatically during playback. Press the DISP button (7) to manually
display iPod playback information in the following order:
• Track/Elapsed Time
• Song TITLE
•ARTIST
• CATEGORY (Album Name)
• Clock
Play/Pause
Press the 1/>/|| button (13) to suspend or resume play. “PAU” flashes on the
display when paused.
Track Selection
Select a Track
Press the TUNE/CH >> (10) or TUNE/CH << (11) for less than 1 second to
advance to the next song in the current category. When a song has been
playing for at least one second, press the TUNE/CH << (11) to replay the
song from the beginning. When a song has been playing for more than one
second, you must press TUNE/CH << twice to move to the previous file.
Fast Forward / Fast Reverse
Press and hold the TUNE/CH >> (10) or TUNE/CH << (11) for more than 1
second to fast forward or fast reverse. Playback begins when the button is
released.
Repeat (RPT)
Press the RPT button (15) during disc play to continuously repeat the
selected song. Press RPT again to stop the repeat function.
Press and hold the RPT button (15) for more than 3 seconds to
continuously repeat the entire album/folder. Press and hold RPT again to
stop the repeat function.
PRESS
RPT SHFSCN
1
2
3 4
5
6
SEL
CAT/DIR
AUX IN
MONO DISP
EQ
BAND
SRC
TUNE/CH
MUTE
A~Z
0~9
PS
ENTER
IPOD
FILE/FOLDER
HD5212
SAT
READY
1
2
4
7
10
11
3
5
6
8
9
20
12
19 21
13 14 16
15
17
18
22