Filter
Top Products
UV8035
13
• LEVEL
Turn the rotary encoder clockwise to
increase or counter-clockwise to decrease
the Mid-Range level from “-6” to “+6”. “00”
represents a flat response.
• Mid-Range Center Frequency (C.Frq)
Turn the rotary encoder to adjust the Mid-
Range Center Frequency to 500Hz, 1KHz,
1.5KHz, or 2.5KHz.
• Mid-Range Quality Factor (BassQ)
Turn the rotary encoder to select one of the
following Mid-Range Quality Factor
options: 2N, 1N, 1W, 2W. The following
chart depicts the curve characteristics for
each step:
Treble
To adjust Treble options, press the rotary
encoder (4) repeatedly until “TREBLE” appears
in the display. Continue pressing the rotary
encoder to access the following Treble settings:
• LEVEL
Turn the rotary encoder clockwise to
increase or counter-clockwise to decrease
the Treble level from “-6” to “+6”. “00”
represents a flat response.
• Treble Center Frequency (Freq)
Turn the rotary encoder clockwise to adjust
the Treble Center Frequency to 10KHz,
12.5KHz, 15KHz or 17.5KHz.
Balance
To adjust the balance from “L12” (full left) to
“R12” (full right), press the rotary encoder (4)
until “Balance” appears in the display. Turn the
rotary encode adjust the balance between the
left and right speakers. “C00” represents a
center balance.
Fader
To adjust the fader from “F12” (full front) to
“R12” (full rear), press the rotary encoder (4)
until “Fader” appears in the display. Turn the
rotary encoder to adjust the fader between the
front and rear speakers. “C00” represents a
center fader level.
Subwoofer (SUB-W)
After connecting a subwoofer to the back of the
unit, press the SUB-W button (13) to turn the
subwoofer function “ON”. Press the rotary
Middle Quality Factor Curve Characteristics
UV8035
2
1
4
6
5 7
3
8910
11
12
13
14
15
16
17
18
19
20
21
22