Filter
Top Products
14
ENGLISH
Selecting the level display
To select the level meter – LEVEL
You can select the level display according to your
preference.
When shipped from the factory, “AUDIO 2” is
selected.
• AUDIO 1: Level meter illuminates from bottom
to top.
• AUDIO 2: Alternates level meter (moves from
bottom to top) and illumination
display.
• OFF : Erases the audio level indicator.
1
Press and hold SEL for more than 2
seconds.
“CLOCK H”, “CLOCK M”,
“SCM LINK”, “LEVEL”,
“B.SKIP” or “EXT IN
*
”
appears on the display.
★
Displayed only when one of the following sources is
selected — FM, AM and TAPE.
2
Select “LEVEL” if not shown on the
display.
3
Select the desired mode —
“AUDIO 1”, “AUDIO 2” or “OFF”.
4
Finish the setting.
EN13-15KS-FX611[U]-9 11/1/01, 3:17 PM14