Filter
Top Products
20
ENGLISH
EXTERNAL COMPONENT OPERATIONS
You can connect the external component to the CD
changer jack on the rear using the Line Input
Adaptor KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input correctly.
(See “Selecting the external component to use” on page
21.)
1
Select the external component.
Note on One-Touch Operation:
When you press CD-CH, the power automatically
comes on. You do not have to press
to
turn on the power.
• If “LINE IN” does not appear on the display, see
page 21 and select the external input (“EXT IN”).
Scan
Music
Multi
MO
DISP
DISP
SCAN
SCAN
LOUD
LOUD
891011 127
CD CHANGER CONTROL
CD CHANGER CONTROL
Scan
Music
Multi
MO
DISP
DISP
SCAN
SCAN
LOUD
LOUD
891011 127
CD CHANGER CONTROL
CD CHANGER CONTROL
2
Turn on the connected device and
start playing the source.
3
Adjust the volume.
To turn up the
volume
To turn down the
volume
EN20-24KS-FX611[U]-9 11/1/01, 3:19 PM20